Cisco WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch - WAP351-E-K9
Improved Coverage, Easy to Deploy, Secure Business-Class Wireless-N Connectivity.
Tính năng kỹ thuật :
Wireless Access Point hoạt động theo chuẩn N 2.4GHz hoặc chuẩn A 5GHz , cho tốc độ wifi lên đến 300Mbps (tùy điều kiện).
5-Port Gigabit Ethernet Switch.
Hỗ trợ 16 SSID, 16 VLAN. Hỗ trợ Up to 32 active users. Có thể nâng số lượng user hoạt động lên tối đa 240 user bằng kỹ thuật clustering 8 AccessPoint.
Kỹ thuật MIMO gia tăng vùng phủ sóng và loại bỏ điểm chết.
Hỗ trợ tính năng WDS, Repeater, Bridge.
Sẵn sàng hỗ trợ thoại IP và video streaming chất lượng cao. Hỗ trợ xác thực tài khoản của khách bằng trang Login (Captive Portal).
Specifications |
Description |
|
Standards |
IEEE 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460) |
|
Cabling type |
Category 5e or better |
|
Antennas |
Internal antennas optimized for installation on a wall or ceiling |
|
LED indicators |
Power, WLAN, LAN |
|
Operating system |
Linux |
|
Physical Interfaces |
||
Ports |
5 10/100/1000 Ethernet, with support for 802.3af /at PoE, Power Port for AC adapter (not included) |
|
Power Supply |
802.3af/at PoE and External 48V/1.25A DC power adapter (not included) |
|
Buttons |
Reset button, Power On/Off |
|
Lock slot |
Slot for Kensington lock |
|
Physical Specifications |
||
Physical dimensions (W x D x H) |
9.055 x 9.055 x 1.575 in. (230 x 230 x 40 mm) |
|
Weight |
1.34 lb or 0.607 kg |
|
Network Capabilities |
||
VLAN support |
Yes |
|
Number of VLANs |
1 management VLAN plus 16 VLANs for SSIDs |
|
802.1X supplicant |
Yes |
|
SSID-to-VLAN mapping |
Yes |
|
Auto channel selection |
Yes |
|
Spanning Tree |
Yes |
|
Load balancing |
Yes |
|
IPv6 |
Yes ● IPv6 host support ● IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc. |
|
Layer 2 |
802.1Q-based VLANS, 16 active VLANS plus 1 management VLAN |
|
Security |
||
WPA/WPA2 |
Yes, including Enterprise authentication |
|
Access control |
Yes, management access control list (ACL) plus MAC ACL |
|
Secure management |
HTTPS |
|
SSID broadcast |
Yes |
|
Rogue-access-point detection |
Yes |
|
Mounting and Physical Security |
||
Multiple mounting options |
Mounting bracket included for easy ceiling or wall mounting |
|
Physical security lock |
Kensington lock slot |
|
Quality of Service |
||
Quality of service (QoS) |
Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), Client QoS |
|
Performance |
||
Wireless throughput |
Up to 300-Mbps data rate (real-world throughput will vary) |
|
Specifications |
Description |
|
Recommended user support |
32 active clients/users per radio |
|
Multiple-Access Point Management |
||
Single Point Setup |
Yes |
|
Number of access points per cluster |
8 |
|
Active clients per cluster |
240 |
|
Configuration |
||
Web user interface |
Built-in web user interface for easy browser-based configuration (HTTP/HTTPS) |
|
Management |
||
Management protocols |
Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour |
|
Remote management |
Yes |
|
Event logging |
Local, remote syslog, email alerts |
|
Network diagnostics |
Logging and packet capture |
|
Web firmware upgrade |
Firmware upgradable through web browser, imported/exported configuration file |
|
Dynamic Host Configuration Protocol (DHCP) |
DHCP client |
|
IPv6 host |
Yes |
|
HTTP redirect |
Yes |
|
Wireless |
||
Frequency |
Dual concurrent radios (2.4 and 5 GHz) |
|
Radio and modulation type |
Dual radio, orthogonal frequency division multiplexing (OFDM) |
|
WLAN |
802.11n 2x3 multiple-input multiple-output (MIMO) with 2 spatial streams on 2.4 GHz 2x2 multiple-input multiple-output (MIMO) with 2 spatial streams on 5 GHz 20, and 40 MHz for 802.11n PHY data rate up to 600 Mbps |
|
Data rates supported |
802.11a/b/g: ● 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps ● 802.11n: 6.5 to 300 Mbps ◦ 20-MHz bandwidth: MCS 0-15 for supported data rates ◦ 40-MHz bandwidth: MCS 0-15 for supported data rates |
|
Frequency band and 20-MHz operating channels |
A Regulatory Domain: ● 2.412 to 2.462 GHz; 11 channels ● 5.180 to 5.240 GHz; 4 channels ● 5.745 to 5.825 GHz; 5 channels |
E Regulatory Domain: ● 2.412 to 2.472 GHz; 13 channels ● 5.180 to 5.240 GHz; 4 channels
C Regulatory Domain: ● 2.412 to 2.462 GHz; 11 channels ● 5.745 to 5.805 GHz; 4 channels |
Nonoverlapping channels |
2.4 GHz ● 802.11b/g ◦ 20 MHz: 3 ● 802.11n ◦ 20 MHz: 3 5 GHz ● 802.11a ◦ 20 MHz: 9 ● 802.11n ◦ 20 MHz: 9 ◦ 40 MHz: 4 |
|
Wireless isolation |
Wireless isolation between clients |
|
Specifications |
Description |
|
External antennas |
None |
|
Internal antennas |
Internal Fixed PiFA Antenna |
|
Antenna gain in dBi |
Maximum antenna gain of 5.3 dBi on 2.4 GHz Maximum antenna gain of 5.1 dBi on 5 GHz |
|
Wireless distribution system (WDS) |
Yes |
|
Roaming |
802.11i only |
|
Multiple SSIDs |
16 |
|
Wireless VLAN map |
Yes |
|
WLAN security |
Yes |
|
Wi-Fi Multimedia (WMM) |
Yes, with unscheduled automatic power save |
|
Operating Modes |
||
Access point |
Access Point mode, WDS Bridging, Workgroup Bridge mode |
|
Environmental |
||
Power options |
IEEE 802.3af/af Ethernet switch Cisco Power Injector - SB-PWR-INJ2-xx AC Adapter - SB-PWR-48V-xx (not included) PoE power: Peak PoE power: 18W |
|
Compliance |
Safety: ● UL 60950-1 ● CAN/CSA-C22.2 No. 60950-1 ● IEC 60950-1 ● EN 60950-1 Radio approvals: ● FCC Part 15.247, 15.407 ● RSS-210 (Canada) ● EN 300.328, EN 301.893 (Europe) ● AS/NZS 4268.2003 (Australia and New Zealand) EMI and susceptibility (Class B): ● FCC Part 15.107 and 15.109 ● ICES-003 (Canada) ● EN 301.489-1 and -17 (Europe) |
|
Operating temperature |
0° to 40°C (32° to 104°F) |
|
Storage temperature |
-20° to 70°C (-4° to 158°F) |
|
Operating humidity |
10% to 85% noncondensing |
|
Storage humidity |
5% to 90% noncondensing |
|
System memory |
128-MB RAM 128-MB Flash |
|
Package Contents |
||
● Cisco WAP351 Wireless-N Dual Radio Access Point ● Ceiling-/wall-mounting kit ● User guide on CD-ROM ● Quick-start guide ● Ethernet network cable |
||
Minimum Requirements |
||
● Switch or router with PoE support, PoE injector, or AC Power Adapter ● Web-based configuration: Java-enabled web browser |
||
Warranty |
||
Specifications |
Description |
|
Access point |
Limited lifetime |
Table 2. Cisco WAP351 Wireless-N Access Point RF Performance Table
Maximum Transmit Power (dBm) Per Chain |
Receiver Sensitivity (dBm) Per Chain |
|
2.4 GHz – 802.11b |
||
1 Mbps |
17.0 +/- 1.5 |
-91.0 |
11 Mbps |
17.0 +/- 1.5 |
-89.0 |
2.4 GHz – 802.11g |
||
6 Mbps |
17.0 +/- 1.5 |
-93.0 |
54 Mbps |
15.0 +/- 1.5 |
-75.0 |
2.4 GHz – 802.11n HT20 |
||
MCS0/8 |
17.0 +/- 1.5 |
-90.0 |
MCS7/15 |
14.0 +/- 1.5 |
-72.0 |
2.4 GHz – 802.11n HT40 |
||
MCS0/8 |
15.0 +/- 1.5 |
-88.0 |
MCS7/15 |
13.0 +/- 1.5 |
-69.0 |
5 GHz – 802.11a |
||
6 Mbps |
17.0 +/- 1.5 |
-91.0 |
54 Mbps |
13.0 +/- 1.5 |
-73.0 |
5 GHz – 802.11n HT20 |
||
MCS0/8 |
16.0 +/- 1.5 |
-89.0 |
MCS7/15 |
12.0 +/- 1.5 |
-71.0 |
5 GHz – 802.11n HT40 |
||
MCS0/8 |
14.0 +/- 1.5 |
-86.0 |
MCS7/15 |
11.0 +/- 1.5 |
-67.0 |